With simplicity and piece mind, ZZem Screw protects against unwanted forced entry by securing your hardware to the frame of the house, instead of the weak door jamb it self. ZZem Screw is 3" long extending in to both studs of the door way framing. You ask, why not just a longer screw? Here why, most can not drive a 3" screw in with out stripping the head of the screw or hitting a knot and breaking the screw off rending the hole useless. The screw hits the grain of the wood and you drive it in at angle. Also, the screw doesn't match your hardware finish.
The ZZem Screw eliminates all those issues with the easy to install kit, the provided drill bit, (we recommend using a smaller drill bit as a pilot hole to help with accuracy 3/16" works great) Drill it straight and level and you will have a perfectly seated screw and no worry's about knots or wood grain. The Provided trox bit to screw in the ZZem Screw, seat the ZZem Screw just below the surface. Replace the hardware, we supply #9 bright brass hinge screws and a Philips bit but if you have a different finish, most hardware stores carry the #9 hinge screw in a verity of finishes.
If you have any questions please contact us at email@example.com and visit our website at www.zzemscrew.com