3 Minute Installation In Just 3 Easy Steps
ZZem Screw is a patented technology that protects against unwanted forced door entry, by securing your hardware to the frame of the house, not just to the frame of the door. Its easy, almost anyone can install a ZZem Screw, or you know someone who can.
It comes complete with everything you need to install except a drill.
In addition, we can repair stripped screws for door hinges, strike plates, dead bolts, gate hinges & latches, stair rails etc.
ZZem Screw is designed to use the original #9 hinge screws to match your hardware finish - like Stainless Steel, Brass and Bronze, just to name a few.
1.) Remove hardware (strike plate, deadbolt, hinge) now mark the provided drill bit at 3" masking tape works great. Now drill a straight and level hole to 3".
2.) Using the provided torx bit, insert that into the ZZem Screw, set the drill to the lowest speed, screw it in until flush with the surface.
3.) replace the hardware, use the provided Philips bit and #9 hinge screws and tighten.
Now wasn't that easy!
For use with #9 hinge screws only, How to tell (Head of screw is 3/8")
Veteran owned business
100% satisfaction guaranteed
Please contact us with any questions