Feedback & Testimonials



This is a fantastic product. I was turned on to these screws by a friend. I had a few stripped screws on a door hinge in one of our bedrooms that caused the door to catch. I tried toothpicks, popsicle sticks, a longer screw; nothing worked. The thing I love most about this kit is it literally comes with everything you need to use it, except a drill. The instructions were straight forward and easy to follow. I took out the supplied drill bit, and using the ruler that is printed on the package I measured out the drill depth. I then put the bit in my cordless drill and drilled a hole to the depth I had marked on the bit. I then put the supplied torx bit into the drill and screwed in the zzem screw until it was flush with the door frame. Then using the supplied Philips bit in my drill I installed the hinge back into the door frame. The door no longer sags and is rock solid, actually better than new. I'm going to get some more to do the strike plates on the exterior doors to my house. This kit would make it next to impossible for someone to kick the door in. Kudos to the creator of this product. It's high quality, made in America, and the packaging says it was invented by a veteran. That's a triple win in my opinion. I wouldn't hesitate at all to try these out.

Damon Keele
November 22, 2016




I got these for a door that was fully blown out of the bottom hinge. Do not shortcut and drive these on without using the drill bit. You will split your door. Only took about 2 minutes until the door was fully back up and I feel confident enough to lean on the top. These inserts are no joke and way better than wood inserts and trying to jimmy rig any other "patch". It does the job right and I can anticipate this door will outlast any other hinge in the house even though the door is hollow. Anyone with a power drill can do this and by no means is a hard or complicated installation.

The Japexican
December 24, 2016






5 out of 5 stars.

Shipped quickly and fixed our bathroom door! Thanks!

Chelsea Blance
May 1, 2017








Contact us for more information.