20 Pack | 3" | ZZem Screw-Door Security & Repair Kit

ZZem Screw is a patented technology that protects against unwanted forced door entry, by securing your hardware to the frame of the house, not just to the frame of the door. Its easy, almost anyone can install a ZZem Screw, or you know someone who can. 

 It comes complete with everything you need except a drill.

 

1.) Remove hardware (strike plate, deadbolt, hinge) now mark the provided drill bit at 3" masking tape works great. Now drill a straight and level hole to 3". Tips-Use a smaller drill bit to pre drill, it will help with accuracy. When drilling slightly angel bit to the center of the frame (just a few degrees).

2.) Using the provided torx bit, insert that into the ZZem Screw, set the drill to the lowest speed, screw it in until flush with the surface.

3.) replace the hardware, use the provided Philips bit and #9 hinge screws and tighten.

Now wasn't that easy!

 

In addition, we can repair stripped screws for door hinges, strike plates, dead bolts, gate hinges & latches, stair rails etc.

The only permanent stripped screw hole repair system!

 ZZem Screw is designed to use the original #9 hinge screws to match your hardware finish - like Stainless Steel, Brass and Bronze, just to name a few.